The Sheldon Water Department will be performing routine flushing of the water mains in your area on September 10th and September 11th between the hours of 11 p.m. and 7 a.m.
This essential maintenance is necessary to: clear the mains of built-up mineral deposits and sediment, ensure the proper operation of fire hydrants for public safety and help maintain overall water quality throughout the system.
During the flushing period, you may experience temporary discolored water. This is caused by the mineral sediment being stirred up in the water mains. It is harmless, but may stain laundry. You will also experience a slight drop in water pressure. This is normal and temporary. You may also see utility workers operating fire hydrants in your neighborhood.
To minimize any inconvenience, the City of Sheldon recommends the following: before the flushing begins if you need to do laundry, finish it before the scheduled time. During the flushing: Avoid using hot water and minimize your overall water use, especially for laundry.
After the flushing is complete run the cold water tap nearest to your water meter (typically in a basement utility sink, or an outside spigot) for several minutes until it runs clear. If your water still appears discolored, wait 15 to 30 minutes for the sediment to settle and then flush the cold water again. Once the cold water is clear, you can flush your hot water heater by running the hot water taps until the water runs clear. The City of Sheldon apologizes for any inconvenience this may cause and appreciate your patience and cooperation as they perform this vital work. For more information, please contact The Sheldon Water Department at 712-324-2845.
